InstallAware

Posted: **Thu Sep 16, 2010 6:07 pm**

Hello,

I've come across an interesting problem. When i install my application, from the run button in InstallAware or by double clicking the executable it runs fine. If double click the same executable at a later date, it goes through the prerequisites and asks me if i'd to uninstall, change, repair. If I choose uninstall it works great. If i install the same app/build using InstallAware or simply double clicking the EXE and then attemp to uninstall via control panel, it fails. First it goes through the prerequisites (expected) then it prompts me to change, remove, uninstall (expected) and then it asks me to "Please locate your original setup sources to continue operation" with a folder browser (unexpected). I browse to the location of the setup.exe and click ok. The dialog reverts back to the root directory tree. Not knowing what else to do, i click cancel. It gives me an error: Runtime error in setup script: Source File: <My main script> Line Number XXX Original setup sources required to complete operation, sources not found. The line which is cited is the close of the if Variable REMOVE Equals TRUE block. CLearly this block works just fine when run outside of the context of the control panel. I have to imagine the script itself is ok. Is there a setting somewhere that could be incorrect? Is there any way of working around the issue so that clients won't have to deal with it?

Thanks,
brian

offending section from script:

Code: Select all

[DEFINE REGION: Perform Uninstallation]
if Variable REMOVE Equals TRUE
  Comment: Uninstall product
  Comment: TO-DO: Insert any additional uninstall commands here
  Install Files C:\Users\Brian\Documents\BerlaCorp\installer-prereqs\Garmin USBDrivers_21\usb_drivers\WDMSTUB.sys to $ALLTEMPDIR$
  Install Files C:\Users\Brian\Documents\BerlaCorp\installer-prereqs\Garmin USBDrivers_21\usb_drivers\grmnusb.sys to $ALLTEMPDIR$
  Install Files C:\Users\Brian\Documents\BerlaCorp\installer-prereqs\Garmin USBDrivers_21\usb_drivers\grmnusb.inf to $ALLTEMPDIR$
  Install Files C:\Users\Brian\Documents\BerlaCorp\installer-prereqs\Garmin USBDrivers_21\usb_drivers\grmngen.sys to $ALLTEMPDIR$
  Install Files C:\Users\Brian\Documents\BerlaCorp\installer-prereqs\Garmin USBDrivers_21\usb_drivers\grmn1200.sys to $ALLTEMPDIR$
  Install Files C:\Users\Brian\Documents\BerlaCorp\installer-prereqs\Garmin USBDrivers_21\usb_drivers\grmn0200.sys to $ALLTEMPDIR$
  Install Files C:\Users\Brian\Documents\BerlaCorp\installer-prereqs\Garmin USBDrivers_21\usb_drivers\grmn0200.inf to $ALLTEMPDIR$
  Install Files C:\Users\Brian\Documents\BerlaCorp\installer-prereqs\Garmin USBDrivers_21\usb_drivers\grmn0200.sys to $WINSYSDIR$
  Install Files C:\Users\Brian\Documents\BerlaCorp\installer-prereqs\Garmin USBDrivers_21\usb_drivers\grmn1200.sys to $WINSYSDIR$
  Install Files C:\Users\Brian\Documents\BerlaCorp\installer-prereqs\Garmin USBDrivers_21\usb_drivers\grmngen.sys to $WINSYSDIR$
  Install Files C:\Users\Brian\Documents\BerlaCorp\installer-prereqs\Garmin USBDrivers_21\usb_drivers\grmnusb.sys to $WINSYSDIR$
  Install Files C:\Users\Brian\Documents\BerlaCorp\installer-prereqs\Garmin USBDrivers_21\usb_drivers\WDMSTUB.sys to $WINSYSDIR$
  Install Files C:\Users\Brian\Documents\BerlaCorp\installer-prereqs\Garmin USBDrivers_21\usb_drivers\grmnusb.inf to $WINSYSDIR$
  Install Files C:\Users\Brian\Documents\BerlaCorp\installer-prereqs\Garmin USBDrivers_21\usb_drivers\grmn0200.inf to $WINSYSDIR$
  Get Component LowLevelDataAccess Selection State into Variable SELECTED
  if Variable SELECTED Equals TRUE
    Include Script: LowLevelDataAccessUnInstallAutogen
  end
  Get Component MidLevelDataAccess Selection State into Variable SELECTED
  if Variable SELECTED Equals TRUE
    Include Script: MidLevelDataAccessUnInstallAutogen
  end
  Get Component Blackthorn Selection State into Variable SELECTED
  if Variable SELECTED Equals TRUE
    Include Script: BlackthornUnInstallAutogen
  end
  Get Component VirtualEarth Selection State into Variable SELECTED
  if Variable SELECTED Equals TRUE
    Include Script: VirtualEarthUnInstallAutogen
  end
  Get Component KayakoInterface Selection State into Variable SELECTED
  if Variable SELECTED Equals TRUE
    Include Script: KayakoInterfaceUnInstallAutogen
  end
  Get Component Utils Selection State into Variable SELECTED
  if Variable SELECTED Equals TRUE
    Include Script: UtilsUnInstallAutogen
  end
  Get Component PluginPackager Selection State into Variable SELECTED
  if Variable SELECTED Equals TRUE
    Include Script: PluginPackagerUnInstallAutogen
  end
  Get Component UpgradeTool Selection State into Variable SELECTED
  if Variable SELECTED Equals TRUE
    Include Script: UpgradeToolUnInstallAutogen
  end
  Get Component InitBlackthornInstaller Selection State into Variable SELECTED
  if Variable SELECTED Equals TRUE
    Include Script: InitBlackthornInstallerUnInstallAutogen
  end
  Get Component HelpFileIndexer Selection State into Variable SELECTED
  if Variable SELECTED Equals TRUE
    Include Script: HelpFileIndexerUnInstallAutogen
  end
  Get Component LicensingTool Selection State into Variable SELECTED
  if Variable SELECTED Equals TRUE
    Include Script: LicensingToolUnInstallAutogen
  end
  if Variable ARCHITECTURE Equals X86
    DIFx Uninstall x86 driver in folder $ALLTEMPDIR$\grmnusb.inf
    DIFx Uninstall x86 driver in folder $ALLTEMPDIR$\grmn0200.inf
  end
  if Variable ARCHITECTURE Equals AMD64
    DIFx Uninstall x64 driver in folder $ALLTEMPDIR$\grmnusb.inf
    DIFx Uninstall x64 driver in folder $ALLTEMPDIR$\grmn0200.inf
  end
  if Variable ARCHITECTURE Equals IA64
    DIFx Uninstall ia64 driver in folder $ALLTEMPDIR$\grmnusb.inf
    DIFx Uninstall ia64 driver in folder $ALLTEMPDIR$\grmn0200.inf
  end
  Apply Uninstall (get result into variable SUCCESS)
  Set Variable PROGRESS to 100
  else
  <<Code Folding Region>>

Posted: **Thu Sep 16, 2010 7:28 pm**

Just by glancing at that code, I wonder why you have so many Install File comands before the Apply Uninstall command.

Also, your mention of going through the prerequisites is also confusing. Especially that they would display before a modify/change remove...

It sounds like your case is like this:

(without the setup installed)
Run setup.exe (we'll count this as 'running' the setup from IA, like build->Run, no?). Install app.
Run setup.exe. Choose Uninstall.
Result:
works as expected. App properly removed.

(without the setup installed)
Run setup.exe. Install app.
Uninstall app from Add/Remove Programs.
Result:
Dialog appears: "Please locate your original setup sources to continue operation"
Choosing the source location does not detect sources.

Is this a 64-bit application? Or running in 64-bit mode?

Can you provide screenshots of your registry after install?

Posted: **Fri Sep 17, 2010 12:13 pm**

Uninstall_Blackthorn2.txt: rename to .reg; (1.52 KiB) Downloaded 1548 times

Uninstall_{88170E18-9F7D-4266-871E-224C302E27C0}.txt: rename to .reg; (1.87 KiB) Downloaded 1461 times

The application was compiled for cross platform compatibility. I may need to switch to compiling for x86 only due to an unrelated issue. In any event, the installer detects the architecture and varies some of the install components based on architecture (.NET runtime, sqlserverce runtime, etc...).

Is the prereq screen not supposed to precede the uninstall/modify/repair screen? This was the default setup created by the graphical designer unless I managed to screw it up inadvertently.

I found two entries to my application in this subkey:

HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall

The .reg files are attached for each of the two entries.

Posted: **Fri Sep 17, 2010 8:11 pm**

The registry entries look OK...

Please create a new project and choose basic setup. Examine its structure and compare it to yours. I have a feeling some things are mixed up (although you did state that it is installing properly)...

Posted: **Mon Sep 20, 2010 3:46 pm**

Well i can certainly try that but it's 500 lines long...can you give me an idea of what i might be looking for?

Thanks,
brian

Posted: **Mon Sep 20, 2010 6:06 pm**

OK, so create a basic install and add a single file to be installed (to TARGETDIR).

The main thing to compare is the placement of the Install File(s) in relation to Apply Install and Apply Uninstall. (roughly lines 208 - 240 of the basic setup)

Posted: **Tue Sep 21, 2010 1:37 pm**

Well i created a new project with an install of 1 random file. Nothing in particular looked out of place with the exception of the install file lines which you noted earlier (near the uninstall section). I moved these down to the section immediately preceding apply install. This did not have any effect on the problem. Are there any other section i can look at?

Thanks,
brian

Code: Select all

Comment: Modify Target System
[DEFINE REGION: Perform Uninstallation]
if Variable REMOVE Equals TRUE
  Comment: Uninstall product
  Comment: TO-DO: Insert any additional uninstall commands here
  Get Component LowLevelDataAccess Selection State into Variable SELECTED
  if Variable SELECTED Equals TRUE
    Include Script: LowLevelDataAccessUnInstallAutogen
  end
  Get Component MidLevelDataAccess Selection State into Variable SELECTED
  if Variable SELECTED Equals TRUE
    Include Script: MidLevelDataAccessUnInstallAutogen
  end
  Get Component Blackthorn Selection State into Variable SELECTED
  if Variable SELECTED Equals TRUE
    Include Script: BlackthornUnInstallAutogen
  end
  Get Component VirtualEarth Selection State into Variable SELECTED
  if Variable SELECTED Equals TRUE
    Include Script: VirtualEarthUnInstallAutogen
  end
  Get Component KayakoInterface Selection State into Variable SELECTED
  if Variable SELECTED Equals TRUE
    Include Script: KayakoInterfaceUnInstallAutogen
  end
  Get Component Utils Selection State into Variable SELECTED
  if Variable SELECTED Equals TRUE
    Include Script: UtilsUnInstallAutogen
  end
  Get Component PluginPackager Selection State into Variable SELECTED
  if Variable SELECTED Equals TRUE
    Include Script: PluginPackagerUnInstallAutogen
  end
  Get Component UpgradeTool Selection State into Variable SELECTED
  if Variable SELECTED Equals TRUE
    Include Script: UpgradeToolUnInstallAutogen
  end
  Get Component InitBlackthornInstaller Selection State into Variable SELECTED
  if Variable SELECTED Equals TRUE
    Include Script: InitBlackthornInstallerUnInstallAutogen
  end
  Get Component HelpFileIndexer Selection State into Variable SELECTED
  if Variable SELECTED Equals TRUE
    Include Script: HelpFileIndexerUnInstallAutogen
  end
  Get Component LicensingTool Selection State into Variable SELECTED
  if Variable SELECTED Equals TRUE
    Include Script: LicensingToolUnInstallAutogen
  end
  if Variable ARCHITECTURE Equals X86
    DIFx Uninstall x86 driver in folder $ALLTEMPDIR$\grmnusb.inf
    DIFx Uninstall x86 driver in folder $ALLTEMPDIR$\grmn0200.inf
  end
  if Variable ARCHITECTURE Equals AMD64
    DIFx Uninstall x64 driver in folder $ALLTEMPDIR$\grmnusb.inf
    DIFx Uninstall x64 driver in folder $ALLTEMPDIR$\grmn0200.inf
  end
  if Variable ARCHITECTURE Equals IA64
    DIFx Uninstall ia64 driver in folder $ALLTEMPDIR$\grmnusb.inf
    DIFx Uninstall ia64 driver in folder $ALLTEMPDIR$\grmn0200.inf
  end
  Apply Uninstall (get result into variable SUCCESS)
  Set Variable PROGRESS to 100
  else
  <<Code Folding Region>>
   
  [DEFINE REGION: Perform First Time or Maintenance Installation]
   
  Comment: Install/Re-Install product
  Create Shortcut $SHORTCUTFOLDER$\Uninstall Blackthorn2 to $UNINSTALLLINK$
  [OFFLINE CONTENT]
  [DEFINE WEB MEDIA LowLevelDataAccess, Exclude from Build]
  Get Component LowLevelDataAccess Selection State into Variable SELECTED
  if Variable SELECTED Equals TRUE
    Include Script: LowLevelDataAccessInstallAutogen
  end
  [DEFINE WEB MEDIA MidLevelDataAccess, Exclude from Build]
  Get Component MidLevelDataAccess Selection State into Variable SELECTED
  if Variable SELECTED Equals TRUE
    Include Script: MidLevelDataAccessInstallAutogen
  end
  [DEFINE WEB MEDIA Blackthorn, Exclude from Build]
  Get Component Blackthorn Selection State into Variable SELECTED
  if Variable SELECTED Equals TRUE
    Include Script: BlackthornInstallAutogen
  end
  [DEFINE WEB MEDIA VirtualEarth, Exclude from Build]
  Get Component VirtualEarth Selection State into Variable SELECTED
  if Variable SELECTED Equals TRUE
    Include Script: VirtualEarthInstallAutogen
  end
  [DEFINE WEB MEDIA KayakoInterface, Exclude from Build]
  Get Component KayakoInterface Selection State into Variable SELECTED
  if Variable SELECTED Equals TRUE
    Include Script: KayakoInterfaceInstallAutogen
  end
  [DEFINE WEB MEDIA Utils, Exclude from Build]
  Get Component Utils Selection State into Variable SELECTED
  if Variable SELECTED Equals TRUE
    Include Script: UtilsInstallAutogen
  end
  [DEFINE WEB MEDIA PluginPackager, Exclude from Build]
  Get Component PluginPackager Selection State into Variable SELECTED
  if Variable SELECTED Equals TRUE
    Include Script: PluginPackagerInstallAutogen
  end
  [DEFINE WEB MEDIA UpgradeTool, Exclude from Build]
  Get Component UpgradeTool Selection State into Variable SELECTED
  if Variable SELECTED Equals TRUE
    Include Script: UpgradeToolInstallAutogen
  end
  [DEFINE WEB MEDIA InitBlackthornInstaller, Exclude from Build]
  Get Component InitBlackthornInstaller Selection State into Variable SELECTED
  if Variable SELECTED Equals TRUE
    Include Script: InitBlackthornInstallerInstallAutogen
  end
  [DEFINE WEB MEDIA HelpFileIndexer, Exclude from Build]
  Get Component HelpFileIndexer Selection State into Variable SELECTED
  if Variable SELECTED Equals TRUE
    Include Script: HelpFileIndexerInstallAutogen
  end
  [DEFINE WEB MEDIA LicensingTool, Exclude from Build]
  Get Component LicensingTool Selection State into Variable SELECTED
  if Variable SELECTED Equals TRUE
    Include Script: LicensingToolInstallAutogen
  end
  Comment: TO-DO: Insert any additional install commands here
  Install Files C:\Users\Brian\Documents\BerlaCorp\installer-prereqs\Garmin USBDrivers_21\usb_drivers\WDMSTUB.sys to $ALLTEMPDIR$
  Install Files C:\Users\Brian\Documents\BerlaCorp\installer-prereqs\Garmin USBDrivers_21\usb_drivers\grmnusb.sys to $ALLTEMPDIR$
  Install Files C:\Users\Brian\Documents\BerlaCorp\installer-prereqs\Garmin USBDrivers_21\usb_drivers\grmnusb.inf to $ALLTEMPDIR$
  Install Files C:\Users\Brian\Documents\BerlaCorp\installer-prereqs\Garmin USBDrivers_21\usb_drivers\grmngen.sys to $ALLTEMPDIR$
  Install Files C:\Users\Brian\Documents\BerlaCorp\installer-prereqs\Garmin USBDrivers_21\usb_drivers\grmn1200.sys to $ALLTEMPDIR$
  Install Files C:\Users\Brian\Documents\BerlaCorp\installer-prereqs\Garmin USBDrivers_21\usb_drivers\grmn0200.sys to $ALLTEMPDIR$
  Install Files C:\Users\Brian\Documents\BerlaCorp\installer-prereqs\Garmin USBDrivers_21\usb_drivers\grmn0200.inf to $ALLTEMPDIR$
  Install Files C:\Users\Brian\Documents\BerlaCorp\installer-prereqs\Garmin USBDrivers_21\usb_drivers\grmn0200.sys to $WINSYSDIR$
  Install Files C:\Users\Brian\Documents\BerlaCorp\installer-prereqs\Garmin USBDrivers_21\usb_drivers\grmn1200.sys to $WINSYSDIR$
  Install Files C:\Users\Brian\Documents\BerlaCorp\installer-prereqs\Garmin USBDrivers_21\usb_drivers\grmngen.sys to $WINSYSDIR$
  Install Files C:\Users\Brian\Documents\BerlaCorp\installer-prereqs\Garmin USBDrivers_21\usb_drivers\grmnusb.sys to $WINSYSDIR$
  Install Files C:\Users\Brian\Documents\BerlaCorp\installer-prereqs\Garmin USBDrivers_21\usb_drivers\WDMSTUB.sys to $WINSYSDIR$
  Install Files C:\Users\Brian\Documents\BerlaCorp\installer-prereqs\Garmin USBDrivers_21\usb_drivers\grmnusb.inf to $WINSYSDIR$
  Install Files C:\Users\Brian\Documents\BerlaCorp\installer-prereqs\Garmin USBDrivers_21\usb_drivers\grmn0200.inf to $WINSYSDIR$
  [compiler if Variable BUILDMODE Equals PATCH]
  Apply Patch (get result into variable SUCCESS)
  [compiler else]
  if Variable ADVERTISE Equals TRUE
    Apply Advertised (get result into variable SUCCESS)
    else
    Include Script: Bt2Prereqs
    Apply Install (get result into variable SUCCESS)
    if Variable SUCCESS not Equals ERROR
      if Variable SUCCESS not Equals CANCEL
        if Variable ARCHITECTURE Equals X86
          DIFx Install x86 driver in folder $ALLTEMPDIR$\grmn0200.inf
          DIFx Install x86 driver in folder $ALLTEMPDIR$\grmnusb.inf
        end
        if Variable ARCHITECTURE Equals AMD64
          DIFx Install x64 driver in folder $ALLTEMPDIR$\grmn0200.inf
          DIFx Install x64 driver in folder $ALLTEMPDIR$\grmnusb.inf
        end
        if Variable ARCHITECTURE Equals IA64
          DIFx Install ia64 driver in folder $ALLTEMPDIR$\grmn0200.inf
          DIFx Install ia64 driver in folder $ALLTEMPDIR$\grmnusb.inf
        end
      end
    end
    if Variable SUCCESS not Equals ERROR
      if Variable SUCCESS not Equals CANCEL
        Get Component LowLevelDataAccess Selection State into Variable SELECTED
        if Variable SELECTED Equals TRUE
          Include Script: LowLevelDataAccessPostInstallAutogen
        end
        Get Component MidLevelDataAccess Selection State into Variable SELECTED
        if Variable SELECTED Equals TRUE
          Include Script: MidLevelDataAccessPostInstallAutogen
        end
        Get Component Blackthorn Selection State into Variable SELECTED
        if Variable SELECTED Equals TRUE
          Include Script: BlackthornPostInstallAutogen
        end
        Get Component VirtualEarth Selection State into Variable SELECTED
        if Variable SELECTED Equals TRUE
          Include Script: VirtualEarthPostInstallAutogen
        end
        Get Component KayakoInterface Selection State into Variable SELECTED
        if Variable SELECTED Equals TRUE
          Include Script: KayakoInterfacePostInstallAutogen
        end
        Get Component Utils Selection State into Variable SELECTED
        if Variable SELECTED Equals TRUE
          Include Script: UtilsPostInstallAutogen
        end
        Get Component PluginPackager Selection State into Variable SELECTED
        if Variable SELECTED Equals TRUE
          Include Script: PluginPackagerPostInstallAutogen
        end
        Get Component UpgradeTool Selection State into Variable SELECTED
        if Variable SELECTED Equals TRUE
          Include Script: UpgradeToolPostInstallAutogen
        end
        Get Component InitBlackthornInstaller Selection State into Variable SELECTED
        if Variable SELECTED Equals TRUE
          Include Script: InitBlackthornInstallerPostInstallAutogen
        end
        Get Component HelpFileIndexer Selection State into Variable SELECTED
        if Variable SELECTED Equals TRUE
          Include Script: HelpFileIndexerPostInstallAutogen
        end
        Get Component LicensingTool Selection State into Variable SELECTED
        if Variable SELECTED Equals TRUE
          Include Script: LicensingToolPostInstallAutogen
        end
      end
    end
  end
  [compiler end]
  Set Variable PROGRESS to 100
end
<<Code Folding Region>>
<<Code Folding Region>>

Posted: **Tue Sep 21, 2010 1:39 pm**

Also, i just realized that it does not matter if I am removing, modifying or repairing. When running the installer from the control panel it gets confused looking for the original source.

Posted: **Tue Sep 21, 2010 3:33 pm**

Here's another thing I just noticed: when I am prompted to locate the original source and fail to do this, the installer gives me an error message pointing me to line 344 of my main source file. Line 344 looks like this:

Code: Select all

  Apply Uninstall (get result into variable SUCCESS)
  Set Variable PROGRESS to 100
  else
  <<Code Folding Region>>
   //line 344!!!
  [DEFINE REGION: Perform First Time or Maintenance Installation]
   
  Comment: Install/Re-Install product
  Create Shortcut $SHORTCUTFOLDER$\Uninstall Blackthorn2 to $UNINSTALLLINK$
  [OFFLINE CONTENT]
  [DEFINE WEB MEDIA LowLevelDataAccess, Exclude from Build]

This is starting to seem like it might be related to or at least affected by the strange bug I experienced earlier where the lines allegedly being executed are incongruous with what's actually happening. (In other words, if for example you add the line MessageBox Some Caption, Some Text and set a break point at that line, and debug, you will indeed see execution at that line, however as you step through the script you won't see the Message Box until 10 lines later at some unrelated command.)

Any one have any thoughts about this?

Posted: **Tue Sep 21, 2010 11:18 pm**

I'll discuss this with development tomorrow to see if there's something we can do to find out what's happening.

I can't recall, did you originally create the script in an older version of IA, then upgrade? Or did the debugging-skip start to appear out of nowhere?

Posted: **Wed Sep 22, 2010 7:48 am**

I have not updated my IA install. I grabbed the latest copy at the time and have not changed it since. (As far as i know there have been no new releases since then.) The debugging skip seems to have been happening since I started using the product. It took me a little while to realize it was happening (thought I was just not understanding the scripts...), but I think it was always there.

Thanks for the help.

Posted: **Mon Sep 27, 2010 9:45 am**

Any ideas yet?

Posted: **Tue Oct 05, 2010 7:02 pm**

Tomorrow i'm going to try to build the entire thing from scratch in hopes that the problem goes away. If it does, i'll send in both projects.

Posted: **Tue Oct 05, 2010 8:41 pm**

I'm not sure where to begin, honestly. I was recently troubleshooting a patch issue and for the life of me, could not recover the sample project that the customer sent us, but if I created a new project from scratch, copying and recreating everything from the supplied project, the one I created worked fine.

There shouldn't really be any difference between running the Uninstall from Add/Remove (it just calls the IA cached project) and the "original installer".

It might be helpful to know if you can uninstall it using this program I created to test (Un)Install MSI. Just feed it your project code GUID. Please upload the log if it fails.

Posted: **Wed Oct 06, 2010 7:21 am**

I tried it once by entering the GUID with no braces and got a popup that said error. I tried again by entering the GUID with braces. The remove button was unresponsive. Nothing happened. No logs were produced.

Also, not sure if sent this along already but here are the registry keys that point to the uninstall. I checked, the path does exist (uninstall string as well as install path.) I get the "source not found" problem when uninstalling from this file. For some reason i get an error message this time, indicating that there is a problem with one of the lines in my script where i define a file bag which is used during the prerequisite section.

I can't really afford to do any more debugging at this time and I've had to rearrange my build process for unrelated reasons, so going forward my installer will be completely different. If i experience the same problem i'll try the uninstallmsi tool again.

InstallAware

Uninstall from control panel fails

Uninstall from control panel fails

Re: Uninstall from control panel fails

Re: Uninstall from control panel fails

Re: Uninstall from control panel fails

Re: Uninstall from control panel fails

Re: Uninstall from control panel fails

Re: Uninstall from control panel fails

Re: Uninstall from control panel fails

Re: Uninstall from control panel fails

Re: Uninstall from control panel fails

Re: Uninstall from control panel fails

Re: Uninstall from control panel fails

Re: Uninstall from control panel fails

Re: Uninstall from control panel fails

Re: Uninstall from control panel fails